QD/Q Small multistage submersible electric pump

Product serial number

Category

Tel-Phone：0576-86330518

Back to list



1

Product description

Parameters

Terms of use

QDX submersible pump motor is located in the upper part ofthe electric pump, for the centrifugal impeller, the spiral casestructure; the pump and the motor adopts the double end facemechanical seal. This series pump is due to the small size, lightweight, particularly suitable for underground pumping, irrigation,aquaculture Aerobics in water supply and drainage, gardenwatering and hotels, canteens, high-rise buildings and otherplaces water use.

Conditions of use

Electric pump should be in the following conditions can continue to work normally
1. Motor entry depth shall not exceed 5m;
2. The temperature of the medium generally does not exceed =40℃ ;
3.The volume ratio of solid impurities shall not exceed 0.1%; The grain size shallnot be greater than 3mm;
4.The power supply frequency is 50Hz,and the voltage fluctuation range is 0.9-1.1 times of the rated voltage.

Tachnical parameter

TYPE	Power (KW)	Voltage (V)	Frequency (Hz)	Rated flow (m³/h)	Rated lit (m)	Caliber (mm)	Speed (r/min)
QD3-35/2-0.75	0.75	220	50	3	35	25	2860
Q3-35/2-0.75	0.75	380	50	3	35	25	2860
QD6-25/2-0.75	0.75	220	50	6	25	32/38	2860
Q6-25/2-0.75	0.75	380	50	6	25	32/38	2860
QD3-48/3-1.1	1.1	220	50	3	48	25	2860
Q3-48/3-1.1	1.1	380	50	3	48	25	2860
QD6-32/3-1.1	1.1	220	50	6	32	32/38	2860
Q6-32/3-1.1	1.1	380	50	6	32	32/38	2860
QD3-62/4-1.5	1.5	220	50	3	62	25	2860
Q3-62/4-1.5	1.5	380	50	3	62	25	2860
QD6-48/4-1.5	1.5	220	50	6	48	32/38	2860
Q6-48/4-1.5	1.5	380	50	6	48	32/38	2860
QD6-35/2-1.5	1.5	220	50	6	35	32/38	2860
Q6-35/2-1.5	1.5	380	50	6	35	32/38	2860
QD10-26/2-1.5	1.5	220	50	10	26	51	2860
Q10-26/2-1.5	1.5	380	50	10	26	51	2860
QD15-20/2-1.5	1.5	220	50	15	20	64	2860
Q15-20/2-1.5	1.5	380	50	15	20	64	2860
QD3-82/5-1.8	1.8	220	50	3	82	25	2860
Q3-82/5-1.8	1.8	380	50	3	82	25	2860
QD6-56/5-1.8	1.8	220	50	6	56	32/38	2860
Q6-56/5-1.8	1.8	380	50	6	56	32/38	2860
QD10-36/3-1.8	1.8	220	50	10	36	51	2860
Q10-36/3-1.8	1.8	380	50	10	36	51	2860
QD15-25/3-1.8	1.8	220	50	15	25	64	2860
Q15-25/3-1.8	1.8	380	50	15	25	64	2860
QD3-96/6-2.2	2.2	220	50	3	96	25	2860
Q3-96/6-2.2	2.2	380	50	3	96	25	2860
QD6-68/6-2.2	2.2	220	50	6	68	38	2860
Q6-68/6-2.2	2.2	380	50	6	68	38	2860
QD10-42/3-2.2	2.2	220	50	10	42	51	2860
Q10-42/3-2.2	2.2	380	50	10	42	51	2860
QD15-30/3-2.2	2.2	220	50	15	30	64	2860
Q15-30/3-2.2	2.2	380	50	15	30	64	2860
QD10-50/4-2.6	2.6	220	50	10	50	51	2860
Q10-50/4-2.6	2.6	380	50	10	50	51	2860
Q3-110/7-2.6	2.6	380	50	3	110	25	2860
Q6-82/7-2.6	2.6	380	50	6	82	38	2860
Q3-124/8-3.2	3.2	380	50	3	124	25	2860
Q6-96/8-3.2	3.2	380	50	6	96	38	2860
Q3-138/9-3.6	3.6	380	50	3	138	25	2860
Q3-152/10-4	4	380	50	3	152	25	2860